Metrologic Instruments 1070

APPENDIX C

Limited Warranty

The Tech 10® scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility Tech 10®.

The Tech 10® scanners have a two (2) year limited warranty from the date of manufacture. Metrologic warrants

and represents that all Tech 10® scanners are free of all defects in material, workmanship and design, and have

been produced and labeled in compliance with all applicable U.S. Federal, state and local laws, regulations and

ordinances pertaining to their production and labeling.

This warranty is limited to repair, replacement of Product or refund of Product price at the sole discretion of

Metrologic. Faulty equipment must be returned to the Metrologic facility in Blackwood, New Jersey, U.S.A. or

Puchheim, Germany. To do this, contact Metrologic’s Customer Service/Repair Department to obtain a Returned

Material Authorization (RMA) number.

In the event that it is determined the equipment failure is covered under this warranty, Metrologic shall, at its

sole option, repair the Product or replace the Product with a functionally equivalent unit and return such

repaired or replaced Product without charge for service or return freight, whether distributor, dealer/reseller,

or retail consumer, or refund an amount equal to the original purchase price.

This limited warranty does not extend to any Product which, in the sole judgement of Metrologic, has been

subjected to abuse, misuse, neglect, improper installation, or accident, nor any damage due to use or

misuse produced from integration of the Product into any mechanical, electrical or computer system. The

warranty is void if the case of Product is opened by anyone other than Metrologic’s repair department or

authorized repair centers.

THIS LIMITED WARRANTY, EXCEPT AS TO TITLE, IS IN LIEU OF ALL OTHER WARRANTIES OR

GUARANTEES, EITHER EXPRESS OR IMPLIED, AND SPECIFICALLY EXCLUDES, WITHOUT

LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

UNDER THE UNIFORM COMMERCIAL CODE, OR ARISING OUT OF CUSTOM OR CONDUCT. THE

RIGHTS AND REMEDIES PROVIDED HEREIN ARE EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS

OR REMEDIES. IN NO EVENT SHALL METROLOGIC BE LIABLE FOR ANY INDIRECT OR

CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES TO PERSON OR PROPERTY, OR

EFFECT ON BUSINESS OR PROPERTY, OR OTHER DAMAGES OR EXPENSES DUE DIRECTLY OR

INDIRECTLY TO THE PRODUCT, EXCEPT AS STATED IN THIS WARRANTY. IN NO EVENT SHALL

ANY LIABILITY OF METROLOGIC EXCEED THE ACTUAL AMOUNT PAID TO METROLOGIC FOR THE

PRODUCT. METROLOGIC RESERVES THE RIGHT TO MAKE ANY CHANGES TO THE PRODUCT

DESCRIBED HEREIN.

USA Corporate Headquarters Germany

Metrologic Instruments, Inc. Metrologic Instruments Gmbh

90 Coles Road Dornierstrasse 2

Blackwood, NJ 08012-4683 82178 Puchheim b.

Customer Service: 1-800-ID-METRO Munich, Germany

Tel: 856-228-8100 Tel: 49-89-89019-0

Email: info@metrologic.com Fax: 49-89-89019-200