3
INTRODUCTION
Components of the ScanQuest Scan Engine
Figure 1: IS4110
Figure 2: IS4125
Scanner window: This aperture emits laser light.
Infrared Object Sensor: When a specified time has elapsed without any
scanning, the unit will enter a “standby” mode. To
reactivate the unit, present an object in front of the
IR (infrared) sensor.
Ribbon Cables: This IS4110 has a 10 position FFC/FPC cable and the
IS4125 has a 12-position FFC/FPC cable. Refer to
Scanner Termination starting on page 15.