Metrologic Instruments IS6520 Series, MS6520 Series APPENDIX D

APPENDIX D

The IS6520/MS6520 Cubit® scanners are manufactured by Metrologic at its

Blackwood, New Jersey, U.S.A. facility. The IS6520/MS6520 Cubit® scanners

have a two (2) year limited warranty from the date of manufacture. Metrologic

warrants and represents that all IS6520/MS6520 Cubit® scanners are free of all

defects in material, workmanship and design, and have been produced and

labeled in compliance with all applicable U.S. Federal, state and local laws,

regulations and ordinances pertaining to their production and labeling.

This warranty is limited to repair, replacement of Product or refund of Product

price at the sole discretion of Metrologic. Faulty equipment must be returned to

the Metrologic facility in Blackwood, New Jersey, U.S.A. or Puchheim, Germany.

To do this, contact Metrologic’s Customer Service/Repair Department to obtain a

Returned Material Authorization (RMA) number.

In the event that it is determined the equipment failure is covered under this

warranty, Metrologic shall, at its sole option, repair the Product or replace the

Product with a functionally equivalent unit and return such repaired or replaced

Product without charge for service or return freight, whether distributor,

dealer/reseller, or retail consumer, or refund an amount equal to the original

purchase price.

This limited warranty does not extend to any Product which, in the sole

judgement of Metrologic, has been subjected to abuse, misuse, neglect,

improper installation, or accident, nor any damage due to use or misuse

produced from integration of the Product into any mechanical, electrical or

computer system. The warranty is void if the case of Product is opened by

anyone other than Metrologic’s repair department or authorized repair centers.

THIS LIMITED WARRANTY, EXCEPT AS TO TITLE, IS IN LIEU OF ALL OTHER WARRANTIES OR

GUARANTEES, EITHER EXPRESS OR IMPLIED, AND SPECIFICALLY EXCLUDES, WITHOUT

LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE UNDER THE UNIFORM COMMERCIAL CODE, OR ARISING OUT OF CUSTOM OR

CONDUCT. THE RIGHTS AND REMEDIES PROVIDED HEREIN ARE EXCLUSIVE AND IN LIEU

OF ANY OTHER RIGHTS OR REMEDIES. IN NO EVENT SHALL METROLOGIC BE LIABLE FOR

ANY INDIRECT OR CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES TO

PERSON OR PROPERTY, OR EFFECT ON BUSINESS OR PROPERTY, OR OTHER DAMAGES

OR EXPENSES DUE DIRECTLY OR INDIRECTLY TO THE PRODUCT, EXCEPT AS STATED IN

THIS WARRANTY. IN NO EVENT SHALL ANY LIABILITY OF METROLOGIC EXCEED THE

ACTUAL AMOUNT PAID TO METROLOGIC FOR THE PRODUCT. METROLOGIC RESERVES

THE RIGHT TO MAKE ANY CHANGES TO THE PRODUCT DESCRIBED HEREIN.

Metrologic Instruments, Inc. Metrologic Instruments GmbH

90 Coles Road Dornierstrasse 2

Blackwood, NJ 08012-4683 82178 Puchheim b

Customer Service Department: Munich, Germany

1-800-ID-METRO (1-800-436-3876) TEL: 49-89-89019-0

TEL: 856-228-8100 FAX: 49-89-89019-200

FAX: 856-228-6673