Metrologic Instruments IS8000 V,

When the scanner is on, the activity of the red and green LEDs

indicate the status of the scanner.

Flashing Red, No Green

During power-up and diagnostic mode.

Steady Red, No Green

Unit has completed power-up, the VLD is emitting

light, and the unit is ready to scan.

Steady Red, Green Flash

When the scanner transmits a successful read, the

green LED will flash. Generally, if the green LED does

not flash, then the bar code has not been successfully

read. If handshaking is being used, the green LED

goes out when proper handshaking has completed.

When the green light turns off, communication to the

host is complete.

Alternating Red and Green with razz tone

This indicates a motor failure.

Steady Red, Green Flashing with a beep

Scanner has entered program mode successfully.

(See Running the MetroSet

2 Program for more

details on configuring the scanner).

Steady Red, Green Flashes 3 times with 3 beeps

Scanner has exited program mode successfully.

Note: If the scanner has been configured for reverse

LED convention, via MetroSet 2, all mode

indicators described above also reverse.