Metrologic Instruments MLPN 2168

Maintenance

Smudges or dirt that appears on the scanner window can interfere with proper scanning.

Therefore, the window will need occasional cleaning.

1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth.

2. Gently wipe the scanner window.

Configuration of the Scanner to the Host System

The scanner has been configured at the time of manufacture based on information supplied at

the time of order. If ScanSet® is being used, refer to the ScanSet documentation for information

on how to configure your scanner.

Contents

Main METROLOGIC INSTRUMENTS, INC. Locations USA Corporate Headquarters ii South America Europe Table of Contents iii Unpacking List Introduction Labels Metrologic 2 Applications and Protocols B UNITS Page Scanner Connections Caution: 4 Attaching the Scanner to the Stand and Work Surface Page Appendix A TECH 8 Laser Bar Code Scanner Specifications Mechanical Electrical Appendix A (Continued) Operational Environmental 8 Appendix B Version A1 Pin Assignments for the Mil spec Connector 9 Appendix B (Continued) Version A15 Pin Assignments for the Mil spec Connector Appendix C Warranty and Disclaimer Limited Warranty 11 Appendix D Notices 12 Appendix D (Continued) Page Page Index