DEFAULT SETTINGS
COMMUNICATION PARAMETERS
Many functions of the scanner can be "configured" - that is, enabled or disabled. The scanner is shipped from the factory pre-
configured to a set of default conditions. The default parameter of the scanner has an asterisk ( * ) in the charts on the
following pages. If an asterisk is not in the default column then the default setting is Off or Disabled. Every interface does not
support every parameter. If the interface supports a parameter listed in the charts on the following pages, a check mark will
appear.
PARAMETER DEFAULT OCIA RS232 IBM 46XX USB
UPC/EAN * 9999
Code 128 * 9999
Code 93 9999
Codabar 9999
Interleaved 2 of 5 (ITF) 9999
MOD 10 Check on ITF 9999
Code 11 9999
Code 39 9999
Full ASCII Code 39 9999
MOD 43 CD on Code 39 9999
Transmit Mode 43 CD 9999
Paraff 9999
Paraff Lead “A” 9999
Allow Paraff Failures 9999
French PC Terminal 9
MSI-Plessey 9999
Airline (15 digit) 2 of 5 9999
Airline (13 digit) 2 of 5 9999
Matrix 2 of 5 9999
Telepen 9999
UK Plessey 9999
STD 2 of 5 9999
MSI-Plessey 10/10 Check Digit 9999
MSI-Plessey MOD 10 Check Digit 9999
ITF Symbol Lengths Variable 9999
ITF Minimum Symbol Length 6 9999
Symbol Length Lock None 9999
Minimum Symbol Length 4 9999
Trioptic 9999
RSS14 Enable 9999
RSS14 ID “]e0” * 9999
RSS14 App ID “01” * 9999
RSS14 Check Digit * 9999
43