27
DEFAULT SETTINGS
Many functions of the scanner can be configured or enabled/disabled.
The scanner is shipped from the factory configured to a set of default conditions.
All default parameters of the scanner have an asterisk ( * ) marked in the default
column. If an asterisk is not in the default column then the default setting is off or
disabled. Every interface does not support every parameter. A check
mark () will appear in the interface column if the interface supports the
parameter listed.
Parameter Default OCIA RS232 Light
Pen
IBM
46xx KBW USB Laser
Emulation
Normal Scan Mode *  
Continuous Scan Mode  
Blinky Scan  
Continuous Blinky Scan  
Custom (One Shot) Scan  
Manual Activation Mode  
CodeGate Active *  
CodeGate Inactive  
UPC/EAN *  
Code 128 *  
Code 93 *  
Codabar *  
Interleaved 2 of 5 (ITF) *  
MOD 10 Check on ITF  
Code 11  
Code 39 *  
Full ASCII Code 39  
Mod 43 Check on Code 39  
MSI-Plessy 10/10
Check Digit  
MSI-Plessy Mod 10
Check Digit *  
Paraf Support ITF  