31
DEFAULT SETTINGS
Many functions of the scanner can be "programmed" - that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set
of default conditions. The default parameter of the scanner has an
asterisk ( * ) in the charts on the following pages. If an asterisk is not in
the default column then the default setting is Off or Disabled. Every
communication does not support every parameter. If the communication
supports a parameter listed in the charts on the following pages, a check
mark will appear.
PARAMETER DEFAULT OCIA RS-232* LIGHT
PEN
IBM
46XX KBW LASER
EMULATION
UPC/EAN *üüüüüü
Code 128 *üüüüüü
Code 93 *üüüüüü
Codabar üüüüüü
Interleaved 2 of 5 (ITF) *üüüüüü
MOD 10 Check on ITF üüüüüü
Code 11 üüüüüü
Code 39 *üüüüüü
Full ASCII Code 39 üüüüüü
MOD 43 Check on Code 39 üüüüüü
MSI-Plessey üüüüüü
MSI-Plessey 10/10 Check
Digit üüüüüü
MSI-Plessey MOD 10 Check
Digit *üüüüüü
Paraf Support üüüüüü
ITF Symbol Lengths Variable üüüüüü
Minimum Symbol Length 4 üüüüüü
Symbol Length Lock None üüüüüü
Bars High as Code 39 *üü
Spaces High as Code 39 üü
Bars High as Scanned üü
Spaces High as Scanned üü
DTS/SIEMENS ü