Metrologic Instruments MS7320 SCANNER LABELS

16
SCANNER LABELS
The MS7320 has 2 labels on the back of the unit. These labels contain the
model number, date of manufacture, serial number, and caution information. An
additional caution label is located under the window faceplate and a label noting
the jack interfaces is located under the connector cover. The following are
examples of these labels.
Figure 11: Scanner Labels
To maintain compliance with applicable standards, all circuits connected to the
scanner must meet the requirements for SELV (Safety Extra Low Voltage) according
to EN/IEC 60950-1.
To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm
EN/IEC 60950-1, the power source should meet applicable performance requirements
for a limited
p
ower source.