Metrologic Instruments MS860i manual Installing the Scanner into a Counter

Installing the Scanner into a Counter

Metrologic has designed three plates to accommodate in-counter installation of the scanner. Included automatically with the purchase of the scanner is Metrologic part #45471, Installation Plate. The universal and replacement plates are available at an extra charge. Contact the distributor, dealer or Metrologic to order one of these plates.

Metrologic Part Number 45471, Installation Plate:

This plate is designed for use in counters with no previous cut outs. No routing is necessary for a flush fit as the stainless steel top is only .60mm (.024") thick. The cut out measurements are 180.34mmL x 175.26mmW (7.1" x 6.9"). The final cut out must not be greater than 1.5mm (1/16") or less than the exact measurement. For easier installation, use the mounting template that accompanies this guide.

Metrologic Part Number 45474, Universal Plate:

This plate is designed to fit into an existing cut out up to 292.1mmL x 508mmW (11.5" x 20").

Metrologic Part Number 45470, Replacement Plate:

This plate is designed to fit into a cut out that previously contained an MS260 or MS362 scanner. This plate fits into the existing 293.62mmL x 245.36mmW (11.56" x 9.66") cut out.

11