17. Data Logic
What is Data Logic?
Until now, your TV set and your video recorder were two separate and independent devices.
With the new "Data Logic", we have created a dialogue system with which the TV set and the video recorder can exchange data.
Video recorders with Data Logic offer the following functions:
•Automatic transfer of station information for terrestrial or cable reception.
•Direct TV recording:
the video recorder records the programme currently displayed on the TV screen, regardless of whether this comes from a terre- strial antenna, a cable system or a satellite.
•Direct control of recording:
with the menu "AV recording" or "Timer recording".
•Status messages (such as "Timer recording started") are sent from the video recorder to the TV set and displayed there. (Not available on VC Series)
•Automatic switching to the AV programme position (Not available on VC Series).
•Automatic
Video recorders of the Metz VC series, in combination with a Metz TV set with SAT facility, offer you the tremendous advantage of problemfree recording of SAT programmes.
1. Connecting a Data Logic video recorder to your TV set
Connect the
Data Logic will work only if there is a connection from the
• Switch on the video recorder.
2. Setting the TV set for Data Logic
• Select programme position 0 on the TV set.
The TV set has been programmed in the factory for video recorder operation on programme position 0.
In order to check this, press the white key to display the station table with programme position 0 selected. The picture signal for this programme position must be set to "EURO2: LogicVTR" or "EURO2: LogicVTR+D".
TV station table
Prog | Logo | Chan./Freq. | Signal |
▲▼ |
|
|
|
0 | LOGIC | 05 | LogicVTR+D |
1 | ARD | 06 | Aerial |
2 | ZDF | 34 | Aerial |
If the picture signal is set otherwise, you must set it to EURO 2 "LogicVTR" or "LogicVTR+D" in the menu "Device connection" (see Page 44 of the Operating Instructions.
|
|
| Device connection | Devices | ▼ |
|
|
| EURO1: Video | no device |
|
|
|
| Video Rec. 1 |
| |
1 | 2 | 3 | Decoder A | Video Rec. 2 |
|
|
|
|
| ||
4 | 5 | 6 |
| LogicVTR |
|
|
|
| EURO2: Video |
| |
7 | 8 | 9 | LogicVTR+D |
| |
0 |
| LogicVTR | VTR+DEC(1) |
| |
|
|
|
| ||
|
|
|
| VTR+DEC(2) |
|
Automatic transfer of station informat | ion | for terrestrial or |
cable reception only ! | ||
|
|
|
The automatic transfer of station information saves you the tedious procedure of programming the tuner in your video recorder. After transfer of the information, timer recordings can also be programmed with the video recorder.
Press this key on the
remote control:
The screen displays:
Explanation
1.Call the menu "Station set- tings" on the TV set
MENU
white
green
OK
2.Close the menu and set the date and time on the video recorder.
MENU return | TV picture | ? Help |
Station settings
1 | 2 |
| 3 | Station table |
|
|
|
| |||
4 | 5 |
| 6 |
|
|
7 | 8 |
| 9 | Autostore |
|
| 0 |
|
|
| |
|
|
|
| ||
|
| P+ |
| SAT programming | |
| - | OK | + | ||
|
| P- |
| ||
|
|
|
|
| |
TV |
|
|
|
|
|
MENU |
|
| AV | Station table | ➜ VTR |
? |
|
| |||
A |
|
|
|
|
|
B | AV |
|
| ||
|
|
|
| start ? | |
6 o o + 0 3 B 2 - G B |
| OK | |||
Select video programme position (factory setting: Pr. 0) on the TV set!
Station table ➜ VTR
This menu item can be selected only if there is a fully connected Scart cable between TV and VTR.
If no stations have been set on the video recorder, the TV station table can be transferred to the video recorder.
To transfer the station information:
•Switch on the video recorder.
•Select the menu item "Station table ➜ VTR".
•Confirm this selection by pressing OK - the main menu of the video recorder appears in the background.
•After transfer of the station information, a blue menu of the video recorder appears in the background.
•Close the menu "Station settings" by pressing TV .
TV
• Set and save the date and time on the video recorder.
51
