SAFETY PRECAUTIONS

This symbol is used to call attention to instructions concerning personal safety. Be sure to observe and follow these instructions. Take time to be careful!

WARNING: BEFORE ATTEMPTING TO OPERATE THIS SPREADER, READ AND STUDY THE FOLLOWING SAFETY INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THE SPREADER, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE SAFETY PRECAUTIONS.

Require anyone who will operate this spreader to read and completely understand this Owner’s Manual. Give necessary instructions!

DO NOT operate, service, inspect or otherwise handle this spreader until all operators have read this Owner’s Manual and have been properly trained in the intended usage of the spreader.

Do not allow minors (children) or inexperienced persons to operate this spreader.

If the spreader becomes clogged, shut off the tractor engine and allow all mechanisms to stop. Disconnect PTO shaft and hydraulic hoses (relieve hydraulic pressure). Then, clean or work on the spreader as required.

Always shut off power and disconnect PTO drive shaft and unhook hydraulic hoses (relieve hydraulic pressure) from tractor to prevent accidental startup or unexpected movement before working on machine.

Do not clean, adjust, or lubricate while spreader is in motion.

Make sure all hydraulic fittings are tight and that all hoses are in good condition. Hydraulic fluid escaping under pressure can have sufficient force to penetrate skin and cause serious injury. Never investigate for hydraulic leaks by using a part of the body to feel for escaping fluid.

Inspect when first delivered and regularly thereafter; that all connections and bolts are tight and secure before operating.

Know how to stop the spreader before starting it!

Do not operate until all shields, covers, and guards are in place.

Make certain everyone is clear of the spreader before applying power.

Keep hands, feet and clothing away from moving parts. Loose or floppy clothing should not be worn by the operator.

Stay well clear of the spreader’s rear discharge spinners while operating.

Do not step up on any part of the spreader at any time. Do not use PTO guard as a step.

Do not step over the power take-off shaft. Stay clear of the PTO at all times.

Keep PTO shaft telescoping tube shields turning freely. Keep PTO master shield on tractor. Replace shields missing or damaged.

Never operate PTO above normal 540 RPM rating. Never connect spreader PTO shaft to a 1000 RPM tractor PTO, unless the spreader is equipped with a 1000 RPM optional kit.

Use only properly rated tires.

Do not tow at speeds in excess of 20 MPH when transporting this spreader. Never exceed a safe travel speed.

Observe all applicable traffic laws when transporting on public roadways (where legal to do so). Check local laws for all highway lighting and marking requirements.

Always install a SMV emblem on this spreader for transporting on roadways and keep the emblem clean and bright.

When towing the spreader on public roads a safety chain of sufficient strength to support, along the line of travel, the gross weight of the spreader must be used (See Maximum Load Weight Chart in the Transporting Section). The safety chain should be attached per diagram in the Transporting Section.

MEYER MFG. CORP. PROVIDES GUARDS FOR EXPOSED MOVING PARTS FOR THE OPERATOR’S PROTECTION; HOWEVER, SOME AREAS CANNOT BE GUARDED OR SHIELDED IN ORDER TO ASSURE PROPER OPERATION. THE OPERATOR’S MANUAL AND DECALS ON THE MACHINE ITSELF WARN YOU OF DANGERS AND MUST BE READ AND OBSERVED CLOSELY.

STUDY THE ABOVE SAFETY RULES

FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

Model V-Max

—5—

Page 4 Page 6
Page 5
Image 5
Meyer 3245, 3954, 2636 manual Safety Precautions, Study the Above Safety Rules
Page 4 Page 6

3245, 2636, 3954 specifications

Meyer 3954, 2636, and 3245 are notable models that showcase the brand's commitment to innovation, quality, and performance in the industry of advanced machinery and equipment. Each model is designed to cater to specific operational needs while incorporating cutting-edge technologies and user-friendly features.

The Meyer 3954 model is engineered primarily for heavy-duty applications, making it ideal for industrial use. This model is equipped with a robust engine that delivers optimal power and efficiency. Its key features include a high payload capacity, advanced hydraulic systems for enhanced lifting capabilities, and modular components that simplify maintenance. Furthermore, the intuitive control interface allows operators to manage tasks with precision, improving productivity and reducing operational downtime.

Moving on to the Meyer 2636, this model is tailored for versatility and agility, making it suitable for both indoor and outdoor applications. The compact design allows for easy maneuverability in tight spaces, while the advanced tracking system ensures stability and safety in various environments. The 2636 model is equipped with energy-efficient technology, significantly reducing operational costs while minimizing the environmental impact. Its user-centric design includes ergonomic controls that promote ease of use for operators.

Lastly, the Meyer 3245 stands out for its advanced technological integrations. This model features smart connectivity options, enabling real-time monitoring and diagnostics through a dedicated mobile application. Operators can access key performance metrics, receive alerts for maintenance needs, and optimize operational efficiency from anywhere. The 3245 also boasts enhanced safety features such as collision avoidance systems and automatic shutoff capabilities, making it one of the safest options in its class.

In conclusion, the Meyer 3954, 2636, and 3245 models exemplify the brand's dedication to delivering high-performance machinery tailored to diverse operational requirements. With their respective strengths, these models integrate advanced features and technologies that cater to both industrial and commercial applications, ensuring efficiency, safety, and reliability. As industries continue to evolve, Meyer remains at the forefront, providing innovative solutions that meet the challenges of modern operations.
Top Page Image Contents