Meyer manual Meyer Industrial Spreader Dimensions & Specifications, Capacity, Model 8720/8865

MEYER INDUSTRIAL SPREADER

DIMENSIONS & SPECIFICATIONS

	Industrial 8720	Industrial 8720	Industrial 8856	Industrial 8865
	Trailer Type	Truck Mount	Trailer Type w/	Truck Mount w/
	w/ 21.5 Tires “	w/ Mount Brkts.	28L x 26 Tires	Mount Brkts.
CAPACITY
Bushels Heaped	720	720	865	865
Gallons/Cu.ft. (Struck)	3500/468	3500/468	4200/562	4200/562
Cu. Yards. (struck)	17.33 cu. yards	17.33 cu. yards	20.8 cu. yards	20.8 cu. yards
DIMENSIONS
Overall Length	26’6”	20’10” w/ Hyd	29’10”	24’2” w/ Hyd
		Motor		Motor
Inside Tank Length	16’8”	16’8”	20’	20’
Loading Height	87” w/21.5 or	68”Plus Truck	88” w/28L x 26	68” Plus Truck
	425/65	Height		Height
	91” w/16.00X20
Overall Height -	96” w/21.5 or	77”Plus Truck	97” w/28L x 26	77” Plus Truck
Top of Splash Guard	425/65	Height	Tires	Height
	100” w/16.00X20
Overall Width (std. Axle)	118” w/21.5L	101”	N/A	101”
Outside Tires	114” w/16.00X20
Overall Width w/high	141” w/28L x 26		141” w/ 28L x 26
Floatation axle pkg.			Tires
Top Inside Tank Width	101”	101”	101”	101”
SPECIFICATIONS
Total Weight	13,720#	9,400#	18,020#	10,700#
Maximum Load Net (Lbs.)	35,200#	35,200#	38,000#	38,000#
Lower Auger Diameter	23”	23”	23”	23”
Lower Auger Flighting Thick-	3/8” Sectional	3/8” Sectional	3/8” Sectional	3/8” Sectional
ness
Independent Lower Auger	Standard	Standard	Standard	Standard
Shear Hub Sprockets
3rd Auger (solid material)	Standard - 16”	Standard -16”	Standard - 16”	Standard - 16”
Drive - PTO-RPM	1000 RPM Con-	PTO - Direct Std.	1000 RPM Con-	PTO - Direct Std.
	stant Velocity 1	Hydrostatic-Opt.	stant Velocity 1	Hydrostatic-Opt.
	3/8-21 spline		3/4-20 Spline
Drive Line Protection	Overrunning Cut	Cut Out Clutch w/	Overrunning Cut	Cut Out Clutch w/
	Out Clutch w/	Shear Bolt (Pto	Out Clutch w/	Shear Bolt (Pto
	Shear Bolt Au-	Version)	Shear Bolt Au-	Version)
	gers		gers
Roller Chain Drive	80-120-140	80-120-140	80-120-140	80-120-140
Roller Chain Auto Oiler	Standard	Standard	Standard	Standard
Expeller Speed (RPM)	716 RPM	716 RPM	716 RPM	716 RPM
Expeller Diameter	30”	30”	30”	30”
TANK CONSTRUCTION
Material	Copper Bearing	Copper Bearing	Copper Bearing	Copper Bearing
	Steel	Steel	Steel	Steel
Thickness - Auger Troughs	1/4”	1/4”	1/4”	1/4”
Thickness - Tank Sides	3/16”	3/16”	3/16”	3/16”

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Model 8720/8865 -61-