Meyer Sound MJF-212ATM APPENDIx b: mJf-212A SPECIfICATIONS AND DImENSIONAl DRAwINGS

APPENDIX B

ACOUSTICAl

Note: Recommended maximum operating frequency range. Response depends on loading conditions and room

acoustics.

Operating frequency range 55 Hz – 18 kHz

Note: Recommended maximum operating frequency range. Response depends on loading

conditions and room acoustics.

Frequency response 60 Hz – 16 kHz ±4 dB

Note: Half-space loading measured with 1/3-octave frequency resolution at 4 meters.

Phase response 500 Hz – 16 kHz ±45°

Maximum peak SPL 139 dB

Note: Measured with music, half-space loading, referred to 1 meter.

Dynamic range >110 dB

Coverage 50° symmetrical

Acoustical crossover 1600 Hz

Note: At this frequency, the transducers produce equal sound pressure levels.

TRANSDUCERS

Low/low-mid frequency Two high-power 12" cone drivers with neodymium magnets

Nominal impedance: 2 Ω

Voice coil size: 4"

Power handling capability: 1200 W (AES)

Note: Power handling is measured under AES standard conditions: transducers driven

continuously for two hours with band limited noise signal having a 6 dB peak-average ratio.

High frequency 4" compression driver

Nominal impedance: 8 Ω

Voice coil size: 4"

Diaphragm size: 4"

Exit size: 1.5"

Power handling capability: 250 W (AES)

Note: Power handling is measured under AES standard conditions: transducers driven

continuously for two hours with band limited noise signal having a 6 dB peak-average ratio.

APPENDIx b: mJf-212A SPECIfICATIONS AND DImENSIONAl DRAwINGS