Meyer Sound MM-4CEU DECLARATION Of CONfORmITy ACCORDING TO ISO/IEC GUIDE 22 AND EN 45014

Meyer Sound MM-4/MM-4CEU Operating Instructions.

The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be construed as a

commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or inaccuracies that may appear

in this manual.

Except as permitted by applicable copyright law, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, recording or otherwise, without prior written permission from Meyer Sound.

SpeakerSense, MultiSense, MAPP Online Pro, and all alphanumeric product names are trademarks of Meyer Sound. Meyer Sound and SIM are

registered trademarks of Meyer Sound. All third-party trademarks mentioned herein are the property of their respective trademark holders.

Printed in the U.S.A.

Part Number: 05.091.012.01 Rev. F

DECLARATION Of CONfORmITy ACCORDING TO ISO/IEC GUIDE 22 AND EN 45014

manufacturer's Name:

Meyer Sound Laboratories Inc.

manufacturer's Address:

2832 San Pablo Avenue

Berkeley, California 94702-2204, USA

declares that the product

Product Name: MM-4CEU

Product Options: All

conforms to the following Product Speciﬁcations

Safety: EN 60065: 2002

EmC: EN55103-1: 1997 emission1

EN55103-2: 1997 immunity2

This device also complies with EN 55103-1 & -2.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including inter-

ference that may cause undesired operation.

Supplementary Information

The product herewith complies with the requirements of the Low

Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.

Ofﬁce of Quality Manager

Berkeley, California USA

March 27, 2003

European Contact: Your local Meyer Sound dealer or Meyer Sound

Germany, GmbH. Carl Zeiss Strasse 13, 56751 Polch, Germany.

Telephone: +49 2654 9600 58 Fax: +49 2654 9600 59

Environmental specifications for meyer Sound Electronics products

Operating Temperature: 0˚ C to + 45˚ C

Nonoperating Temperature: <-40˚ C or > +75˚ C

Humidity: to 95% at 35˚C

Operating Altitude: to 4600 m (15,000 ft)

Nonoperating Altitude: to 6300 m (25,000 ft)

Shock: 30g 11 msec half-sine on

each of 6 sides

Vibration: 10 Hz to 55 Hz (0.010 m

peak-to-peak excursion)

European Office:

Meyer Sound Lab. GmbH

Carl Zeiss Strasse 13

56751 Polch, Germany

Made by Meyer Sound Laboratories

Berkeley, California USA

MM-4CEU MM-4CEU

UL Listed Loudspeakers for Fire-protective Signaling Systems:

Model MM-4 EN3, suitable for indoor/outdoor/wet use.•

UL Listed General Signaling Equipment:

Model MM-4 Phoenix, suitable for indoor/dry use and for •

use in air handling and plenum spaces.

Model MM-4 EN3, suitable for outdoor/wet use and for use •

in air handling and plenum spaces.