10.25
[260 mm]
15.50
[394 mm]
31.00
[787 mm]
To reduce the risk of fire or electric shock
ATTENTION:
U.K. WARNING:
ATENCI”N:
ACHTUNG:
Turn on 165V~ Turn off 264V~
Turn on 85V~ Turn off 134V~
1400W RMS MAX 1400W RMS MAX
95-125V ~ 208-235V~
REFER SERVICING TO QUALIFIED PERSONNEL.
NO OPERATOR SERVICEABLE PARTS INSIDE.
Operational Voltage Range:
50-60Hz 50-60Hz
Auto-Voltage Select
UND REPARATUR NUR DURCH ELEKTROF√CHKRAFTE
INTERNES NE SONT AUTORISEES QU'AU
PERSONNEL TECHNIQUE QUALIFI…
AUTHORIZADO A PERSONAL T…CNICO CALIFICO
do not expose this appliance to rain or moisture.
THIS APPARATUS MUST BE EARTHED.
ACCESO INTERNO SOLO
GEH√USE NICHT OFFENE WARTUNG
ENTRETIENET REPARATIONS
THIS PRODUCT MUST BE GROUNDED
clearance from this surface and adequate ventilation.
To ensure proper operation, allow at least 6 inches
This surface may reach high tempuratures white in use.
Refer servicing to qualified personnel.
No operator or serviceable parts inside.
To reduce the risk of electric shock do not remove cover.
WARNINGS:
18.17
[461 mm]
0.62
[16 mm]
23.94
[608 mm]
12.50
[318 mm]
30.00
[762 mm]
21.33
[541 mm]
20.50
[521 mm]
10.25
[260 mm]
22.38
[568 mm]
3.31
[84 mm]
Back
Top
Front
(Without Grille Frame)
Side
(Without Grille Frame)
Meyer Sound reserves the
right to alter any specification
without notice.
Please visit our web site
at www.meyersound.com for
up-to-date information.
Meyer Sound Laboratories
has devoted itself to
designing, manufacturing,
and refining components
that deliver superb sonic
reproduction. Every part of
every component is
designed and built to
exacting specifications and
undergoes rigorous,
comprehensive testing
in the laboratories.
Research remains an
integral, driving force
behind all production.
Meyer strives for sound
quality that is predictable
and neutral over an
extended lifetime and
across an extended range.
PHYSICAL DIMENSIONS1. Measured Free Space at 2 meters on horn axis.
2. Measured at 1 meter from horn axis using pink noise with cabinet 1 meter
above ground (Half Space)
3. Measured Free Space at 2 meters on centerline axis, 1/3 Oct.
X-10 / X-800 SPECIFICATIONS
X-10 – 04.081.016.01 x1
X-10
Acoustical1
(each loudspeaker)
Crossover
Transducers
Audio Input
Amplifiers
AC P ow er
Physical
X-800
Acoustical3
Notes
Operating Frequency Range
Free Field
Phase Response
Maximum Peak SPL2
Signal to Noise Ratio
Low Frequency
High Frequency
Type
Connector
Nominal Input Level
Type
Output Power
THD, IM, TIM
Connector
Automatic voltage selection
Operational Voltage Range
Max Continuous RMS Current (>10 sec)
Max Burst RMS Current (< 1 s)
Max Peak Current During Burst
Soft Start Turn-on
Dimensions
Weight
Enclosure/Finish
Protective Grill
Operating Frequency Range
Frequency Response 1/3 Oct
Phase Response 1/3 Oct
Maximum Peak SPL2
Maximum Continuous SPL
Sensitivity
18 Hz - 20 kHz
± 2 dB 23 Hz - 17 kHz
± 43° from 100 Hz to 18 kHz (1/24 Oct)
136 dB
>110
500 Hz- 1100 Hz, 950 Hz (equal acoustic pressure)
15-inch LFHP 4-inch voice coil ultra high linear travel
4-inch diaphragm compression driver
10 k impedance, electronically balanced
XLR (A-3) male and female
+4 dBu
Complementary power MOSFET output stages (audio class AB/H)
1200 W rms burst low-channel, 620 W rms burst high-channel,
1820 W rms Total
< .02 %
250 V NEMA L6-20P (twistlock) inlet or IEC 309 male inlet
95-125 V AC and 208-235 V AC; 50 Hz / 60 Hz
Turn on: 85 V AC; Turn off 134 V AC; 50/60 Hz
Turn on: 165 V AC; Turn off 264 V AC; 50/60 Hz
@115 V: 12 A @230 V: 6 A @100 V: 14 A
@115 V: 23 A @230 V: 12 A @100 V: 28 A
@115 V: 33 A @230 V: 17 A @100 V: 39 A
<12 A @ 115 V
Height: 30” (762 mm); Width: 31” (787 mm);
Depth: 21.50” (521 mm)
187 lbs (84.82 kg), 205 lb (93 kg) shipping weight
Smooth, medium gloss
Removable wood frame with cloth cover
16 Hz -200 Hz
± 3 dB 25 Hz -125 Hz
± 50° 25 Hz -125 Hz
135 dB
125 dB
1 Vrms in = 135 dB SPL
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
tel: 510.486.1166
fax: 510.486.8356
e-mail: info@meyersound.com
http: www.meyersound.com
U
LC
UL® ®
LISTED
3K59
COMMERCIAL
AUDIO SYSTEM
Copyright © 2000 Meyer Sound Laboratories, Inc.
All Rights Reserved