MICROBOARDS TECHNOLOGY, LLC | GX-1 DISC PUBLISHER |
Loading Discs
The next step is to load your GX-1 Disc Publisher with output discs. The system will accept CD or DVD 120 mm (12 cm) inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to the surface of the disc. The GX-1 Disc Publisher will only accept 12 cm discs. Business card or 8 cm discs are not supported by this system.
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, against the wide input rod, as seen in figure 2.
The GX-1 Disc Publisher will hold a maximum of 50 discs. DO NOT load more than 50 discs in the system, as this may cause the discs to feed incorrectly.
Front Panel Indicators and Buttons
1. Cancel
2. Print
3. OK
4. Power
1.Cancel Button – Pressing the Cancel button cancels the current print job.
2.Print Button – The light on this button will flash when printing is in progress.
3.OK Button – This button will only be used when you are prompted to do so while processing discs.
4.Power Button and Light – The Power button turns the GX-1 Disc Publisher on and off. It may take a few seconds for the GX-1 Disc Publisher to turn on after you press the Power button. The green light at the base of the Power button flashes when the printer is processing.
NOTE: The AC power switch located on the back of the GX-1 Disc Publisher must be turned on first in order to supply power to the Front Panel.
7
