MicroBoards Technology Premium Series Setup Menu

DVD Premium Series MICROBOARDS TECHNOLOGY, LLC

Setup Menu

1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display

shows SETUP? (MODE CHANGE)

SETUP?

(MODE CHANGE)

2. Press the YES button

3. The first setup option is Mode Select, followed by Write Speeds, ISRC Check, Copy

Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit.

4. Pressing the NO or ▼ button will allow you to move from menu to menu.

5. Pressing the YES button will allow you to view or change the configuration of the system.

6. Please follow the flow chart on page 8 to navigate through the different menus.

Here is a description of each setup menu item:

Mode Select

COPY - Duplication from master disc to blank disc.

VERIFY - It compares a copied disc with the master disc.

COPY+V - Copying in the COPY+VERIFY mode

DVD WR Speed

Available speeds range from 16x down to 1x.

CD WR Speed

Available speeds range from 48x down to 4x.

ISRC Check

Default setting is ON. This feature will copy the ISRC codes from the Master audio disc to the

blank discs.

Auto Run

Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process

when all recorders are loaded with blank media. The master must also be loaded before

duplication will begin.

Copy Quantity

Set up the number of disc you want to copy.

Use the ▼▲buttons to change the number in the current column up or down. YES will move you

one column to the right, NO will move you 1 column to the left. Press YES when in the right

column to save the number of copies entered. The example above shows that 750 copies have

been entered with the cursor currently in the right column (underlined).

Session Mode (CD only. Invalid for DVD)

Select either from AUTO, CLOSE, or OPEN.

AUTO: Make the session of copied disc as same as the master.

CLOSE: Close the session of copied disc.

OPEN: Leave the session of copied disc open.

Reader Select

Changes which drive is selected as the reader. This setting should not be changed.

Drive Inquiry

Displays an inquiry of each drive connected, showing drive model and firmware.

F/W Version

Shows DVD Premium Series firmware version and H/W information.

F/W Update

Used when updating the firmware of the DVD Premium Series duplicator.

Log

Displays the number of successful and unsuccessful discs over the entire life of the duplicator.

>>COPY QUANTITY