Parameter Usage:
-print Specify which tone settings you want to display
ring : ring tone settings
rbt : ring back tone settings
bt : busy tone settings
dt : dial tone settings
flash : flash time settings
-ring To set RING tone value. The played tone type, when Gateway is
receiving a call.
-rbt To set Ring Back Tone value. The played tone type, when
Gateway receives a Q.931 Alerting message. In condition that
Gateway is the originate side.
-bt To set Busy Tone value. The played tone type, when destination is
busy.
-dt To set Dial Tone value. The played tone type, when hook off a
phone set of workable Gateway.
-flash Set the detective flash range in ms, for example, 400-800 ms.
-level Loop Current and On-Hook Line Voltage level set.
Note:
For tone simulation, Gateway adopts dual frequencies as traditional telephone does. If
users want to have their own call progress tone, they can change the value of tones.
High and Low frequency/level/cadence can be configured respectively.
82