1-2. Layout

Power LED (Green)

AC Adapter jack

6 pin FireWire (IEEE1394) port

Fig. 1 Front Side

Fig. 1 shows the front side layout of the FR1SX. Power LED light-on

state indicates the FR1SX is powered. If this LED is NOT lit, an optional AC adapter is needed. Refer to Chapter 8 regarding optional items.

High-Density 50 pin

SCSI connector

Fig. 2 Back Side

Fig. 2 shows the back side layout of the FR1SX. The FR1SX has a High- Density 50 pin SCSI male connector. If you have a SCSI device with a different type such as High-Density 68 pin, Centronics 50 pin or D-Sub 25 pin, you can use an optional adapter. In such a case, refer to Chapter 8.

2