MICROSCANNER
ENGLISH - 13
activate the blinking Hub light.
The word SIGNAL blinks once every two seconds
right below the word Hub. Go to the wiring closet
to view a light that blinks once every two seconds
at the port to which the cable is connected.
MICROSCANNER detects the kind of hub it is
connected to: 10, 100, or 10/100 alternately will
be displayed right after the word Hub. The
number is followed by the letters F and/or H as an
indication for the hub's full or half duplex capabili-
ties. Descriptions are as follows:
10H -10BASE-T
10HF -10BASE-T full duplex
100H -100BASE-TX
100HF -100BASE-T full duplex
100HF4 -100BASE-T full duplex, 100BASE-T4
MICROSCANNER also Identifies workstations.
1. Connect the cable to be tested to the MAIN
jack (identified on the unit right above the
modular 8 jack).
2.To display the length screen, press the
MODE key until the word LENGTH appears
on the screen. MICROSCANNER displays
the word PC followed by the length to the
PC.