Model GXT740/785 Series
GXT740/785 SERIES QUICK REFERENCE CHART
1~15 for GXT785
MENU | Channel | Privacy | Power | VOX | Silent Operation | Roger Beep | Call Tone | Vibrate |
1~42 | Off | H/M/L | oF~5 | On/Off | On/Off | 1~10 | On/Off |
| CTCSS | 1~38 | MENU | WX Scan | WX Channel | WX Alert |
|
| Press & |
|
|
|
| ||
|
|
|
|
|
|
| |
|
| 1~104 | hold Menu |
|
|
|
|
| DCS | button for 5 | 1~10 | 1~10 | On/Off |
| |
| seconds |
| |||||
|
|
|
|
*** Only on Ch 1 ~ 22
MONITOR
Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out of MONITOR mode.
SCAN
Your GXT740/785 Series can scan all 42 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 42 channels and stop on any active channel. Your radio will resume scanning after 4 seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds before resuming scan when PTT button is no longer pressed. To resume scanning, quickly press the 
/
button.
CALL ALERT
Your GXT740/785 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
The GXT740 has 10 call alert selections while the GXT785 has 15 call alerts including 5 “animal sound” call alerts - Cougar, Duck, Crow, Wolf, Turkey.
Page 9 | www.midlandradio.com |
