Model GXT760/795 Series
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK button for 2 seconds. The KEY LOCK icon will appear on the display. PTT and CALL will still be active. Repeat the same procedure to unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5 seconds. The display illumination can also be activated when the MENU, MON/SCAN, and 
/
button is pressed.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the 
/
buttons to select one of the 42 GMRS/FRS channels. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting.
SETTING PRIVACY CODES
Your GXT760/795 Series has 142 Privacy Codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the 
/
buttons to select between Off/CTCSS/DCS. Press again the MENU button and the
/
button to select one of the 38 CTCSS Codes or one of the 104 DCS Codes. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting.
Note : If you select any CTCSS Privacy Code, any
Privacy Code of "oF" will disable the Privacy feature. To commu- nicate between two GXT760/795 Series radios, all radios in your group must be set to the same channel and Privacy Code. The Privacy Code can only be set in channels 1~22.
TRANSMIT (TX) POWER LEVEL SELECTION
Your GXT760/795 Series has 3 power level settings. To select the power level on channels 1~7, 15~33 and 38~42, press the MENU button until a “Pr” icon will appear blinking on the display. Then press the 
/
buttons to select TRANSMIT POWER LEVEL icon (H: Hi/
M:Mid/L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting.
Page 9 | www.midlandradio.com |
