Model GXT800/808/850 Series | ® |
GXT800/808/850 SERIES QUICK REFERENCE CHART
MENU 
Channel
Press & |
| |
hold Menu | 1~22 | |
button | ||
|
WX Channel 
WX Alert
1~10 On/Off
Group Mode | On | Group Code | ID Setting | Caller ID | Ring Tone |
|
|
|
|
|
| 4 digit code (0~9), |
|
|
|
| Off | 0~142 | 1~10 | Press MON to | 0~5 |
|
|
| choose each digit |
|
| ||||
| Privacy | Power | eVOX | Silent Operation | Roger Beep | Call Tone | Vibrate |
| Off | H/M/L | oF~9 | On/Off | On/Off | 1~5 | On/Off |
|
|
|
|
|
| 1~10 for GXT850 |
|
| CTCSS | 1~38 |
|
|
|
|
|
| DCS | 1~104 |
|
|
|
|
|
MONITOR
Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out of MONITOR mode.
SCAN
Your GXT800/808/850 Series can scan all 22 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will resume scanning after 4 seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds before resuming scan when PTT button is no longer pressed. To resume scanning, quickly press the 
/
button.
CALL ALERT
Your GXT800/808/850 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
The GXT800/808 has 5 call alert selections while the GXT850 has 10 call alerts including 5 “animal sound” call alerts - Turkey, Duck, Crow, Cougar, Wolf.
Page 10 | www.midlandradio.com |
