Midland Radio HH54 Features and Controls, Set the Clock, Set the Sleep Alarm, Set the Channel

HH54 Features and Controls

Set the Clock

Controls

Tri-Color Alert LED

Headset/Charge

Jack

Navigational

Buttons

WX/Snooze

Button

ON/OFF Button

Volume Up/Down

Buttons

Travel/Home

Button

Select Button

Menu Button

1.	Press the MENU button to open menu options.
2.	Press the UP arrow to scroll through the menu
	until TIME is displayed. Press the SELECT button.	HH54
3.	Press the UP arrow until the current hour is
	displayed. ( Note AM/PM changes as you scroll
	through the hours.)
4.	Press the RIGHT arrow to save current hour
	and advance to minutes.
5.	Program the minutes the same way.
6.	Press the SELECT button to store the current
	time. Press the MENU button to exit menu mode.

Set the Sleep Alarm

1.	Press the MENU button to open menu options.
2.	Press the UP arrow to scroll through the menu until
	ALARM is displayed. Press the SELECT button.
3.	Press the UP arrow until the current hour is displayed.

LCD Indicators
Battery		MENU	NOAA
			Indicates when
Indicates when	Indicates when
			the radio is on
the battery	the radio is in
			and in weather
level is low	MENU mode
			radio mode
Alphanumeric
Readout
Displays type and
time of alert

Alert Type	Alarm Clock	Travel/Home
Indicates when	Indicates when	Indicates when
VOICE or	the alarm clock is	the radio is
SIREN Alert	activated	either in Travel
type is selected		or Home
		Mode

	(Note AM/PM changes as you scroll through the hours.)
4.	Press the RIGHT arrow to save current hour and
	advance to minutes.
5.	Program the minutes the same way.
6.	Press the SELECT button to store the current time.
7.	Press the MENU button to exit menu mode.

To temporarily silence the sleep alarm, press the WX/SNOOZE

button.This will advance the alarm time by 9 minutes. To silence the alarm for the remainder of the day, press the MENU button.

Set the Channel

Start Over Programming: If you want to start over while programming, press the MENU button continuously until it “backs out” of the programming mode. If no buttons are pres- sed for about one minute the radio will exit the menu mode Invalid Button Press: When you press a button that is not correct for programming the button will beep twice. A single button beep indicates a valid button press.

1.Press the MENU button once.

2.Press the DOWN arrow until CHANNEL is displayed on the LCD. Press the SELECT button.

3.Press the DOWN arrow until you hear the broadcast of your station.Then Press the SELECT button to save your station and exit back to Menu mode.

www.midlandradio.com 3