Model LXT376/440 Series | ® |
LXT376/440 SERIES QUICK REFERENCE CHART
MENU | Channel | Privacy | Power | VOX | Roger Beep | Call Alert | Silent Operation |
Press Menu |
|
|
|
|
|
|
|
button when | 1~22 |
| H/L | oF/1/2/3 | On/Off | 1~5 | On/Off |
in WX Band |
| ||||||
WX Channel | WX Alert | CTCSS | oF~38 |
|
|
| WX Band |
| On/Off | DCS | oF~83 |
|
|
|
|
1~10 |
|
|
|
|
| On/Off |
MONITOR
Pressing and holding the MONITOR button for 3 seconds will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This could also be used to check any activity on your current channel before transmitting.
Press and hold the MONITOR button for 3 seconds again to get out of MONITOR mode.
SCAN
Your LXT376/440 Series can scan all 22 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel for 4 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button.
CALL ALERT
Your LXT376/440 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK button for 4 seconds. The KEY LOCK icon will appear on the display. PTT and CALL will still be active. Repeat the same procedure to unlock the keypad.
Page 9 | www.midlandradio.com |
