Midland Radio NT3 manual Troubleshooting Guide, USE and Care

Model NT3 Series

TROUBLESHOOTING GUIDE

PROBLEM	SOLUTION
No Power	-- Check battery installation and/or replace batteries
	-- Confirm the radios have the same channel. -
	Make sure that you are within range of the other
Cannot Receive	transceivers.
Messages	-- Buildings and other structures may interfere with
	your communication.
	(See ABOUT RANGE on Page 8)
	-- Make sure key lock is not on. See “Keypad Lock”
Radio is not responding	(Page 10).
to button presses	-- Radio might need to be reset. Turn radio off then
	on.
Display is dim	-- Recharge or replace batteries.
	-- Ensure the outlet where the charger is plugged
Charger not functioning	into is functioning properly.
	-- Check that the battery pack is installed in the
	radio properly.

USE AND CARE

1.Use a soft damp cloth to clean the radio

2.Do not use alcohol or cleaning solutions to clean the radio.

3.Do not immerse the radio in water.

4.Dry the radio with dry lint-free cloth should it get wet.

5.Turn off the radio and remove the batteries during long-term storage.

If you have a problem which you believe requires service, please call first and speak with a service technician. Many problems can be remedied over the phone without returning the unit for service.

Page 13 midlandusa.com