Programming the radio for your area:
Your
“Single” County (S.A.M.E.) Code:
1.Press MENU to open menu options.
2.Press ▲ to scroll through menu to SET LOCATION, then press SELECT.
3.Press ▲ to SINGLE then press SELECT.
4. 01 EMPTY will be displayed. Press SELECT.
5.Press ▲ or ▼ to select the desired country then press SELECT.
6.Press ▲ or ▼ to select the desired state/province then press SELECT.
7.Press ▲ or ▼ to select the desired location then press SELECT.
8.Press MENU to exit menu mode.
“Multiple” County Code:
For multiple counties, follow the above instructions. At step 3, press ▲ until MULTIPLE is displayed. The “NEARBY” counties will come up automatically to make selection easy. You can program up to 25 different location codes.
Note: To manually enter a FIPS code, press ► while ## LOCATION is displayed. However, selecting a NEARBY will be unavailable. NEARBY locations are based on weather transmitter coverage area, not geographical location.
Set Alert Type (Display, Voice or Tone):
1.Press MENU to open menu options.
2.Press ▲ to scroll through menu to ALERT TYPE, then press SELECT.
3.Press ▲ to choose VOICE, TONE or DISPLAY then press SELECT.
4.Press MENU to exit menu mode.
Alert Type | Description | |
|
| |
| When the DISPLAY alert type is chosen, only a | |
Display | text alert will scroll on the display. There will be | |
| no audible alarm. | |
| When the VOICE alert type is chosen, the alert | |
Voice | tone will sound for 8 seconds, then you will | |
hear the voice of the weather broadcast for 3 | ||
| ||
| minutes. | |
| When the TONE alert type is chosen, the alert | |
Tone | tone will sound for 3 minutes, or until you press | |
| any button. | |
|
|
page 6 |
| www.midlandusa.com |