Miele 38ACR installation instructions 904665 REV. C 03/2008, General Information, Inventory List

FIREPLACE KITS AND ACCESSORIES

904665

REV. C 03/2008

GLASS DOOR/END PANEL

INSTALLATION INSTRUCTIONS FOR ABF GLASS DOOR/END PANEL PACKAGED SET

MODELS 38ACR AND 38ACR-BB

Lennox's Glass Door/End Panel Packaged Set, Models 38ACR and 38ACR-BB, are designed to be installed on the CR-3835R/L Series fireplaces. These kits come complete with all of the required hardware necessary to complete the task.

Please read and understand these instructions carefully before begin- ning installation and operation. Do not attempt to alter or modify the construction of these glass door assemblies as it could cause a malfunc- tion or possible fire hazard.

The Models 38ACR and 38ACR-BB have been tested and listed by Omni Test Laboratories, Inc.

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.

GENERAL INFORMATION

Before starting the installation of the glass doors and end panel, assure the kit is complete and undamaged. Refer to Figure 1 and the inventory list to identify all necessary parts.

INVENTORY LIST

A.	(1)	Top Channel (door)	F.	(1)	Glass End Panel
B. (1)		Bottom Channel (door)	G.	Door Panel Assembly LH
C.	(1)	Top Channel (panel)	H.	Door Panel Assembly RH
D. (1) Bottom Channel (panel)			J.	(2)	Baffles
E.(1) Corner Post			K.	Hardware Kit (Including

Handles) Installation Instructions

A

J

K

H

G

C

B

F

E

D

Figure 1

END PANEL INSTALLATION STEPS

Step 1. Remove the screen rod covers from the front and corner openings. Remove two angle retainers and replace screws.

Note: Units are shipped without covers installed.

Step 2. Refer to Figure 2 and remove the top two outer screws and loosen the bottom screws at least two (2) turns. Remove corner shipping post, if installed.

CAUTION: REMOVE THE PLASTIC PROTECTIVE COATING FROM ALL BRASS PIECES BEFORE INSTALLATION.

US

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE