Electrical data
All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer is not responsible for unauthorized work. Ensure that power to the appliance is OFF while installation or repair work is performed.
Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filters), match the household electrical supply before installing the hood.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or Miele’s Technical Service.
USA
CDN
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Important
The hood must be hard wired accordingly:
Black/Red wire:. . . . connect to L1 (live)
White wire: . . . . . connect to N (neutral)
Green wire: . . connect to GND (ground)
Maximum load . . . . . . . . . . . . . . . 450 W
Overhead lighting . . . . . . . . . . 4 x 20 W Indirect lighting . . . . . . . . . . . . 2 x 10 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V Frequency . . . . . . . . . . . . . . . . . . 60 Hz Circuit rating. . . . . . . . . . . . . . . . . . 15 A
25
