Installation
Please read the "Important Safety Instructions" and Installation instructions before installing this hood.
Protective film
The casing is covered with a protective film to prevent scratching during transport.
Peel off the film before installing the casing parts.
CAUTION
To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process.
Installation accessories
4 Screws 8 x 60 mm with
4 Washers
(S10 wall anchors included in the packaging are not for use in USA/CDN.)
2 spring clips to hang the hood onto the mounting plate
4 Flat head screws M 6 x 20 mm with nose and
4 M 6 locking nuts for securing the motor assembly
1 hose clip for securing the ducting
27
