Installation accessories
a2 protective shields prevent scratches to the chimney during installation.
b2 hose clips for securing the ducting.
c1 reducing collar
for use with 5" (125 mm) exhaust ducting.
dUpper retaining plate secures the chimney extension.
eMiddle retaining plate for additional stability of the chimney.
fLower retaining plate secures the canopy and motor assembly.
gInstallation kit for recirculation mode contains diverter, 2 grilles and an hose (optional accessory)
Caution: During the installation process, please be careful of sharp edges that can cause harm.
Installation instruction sheet
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy.
(S8 wall anchors included in the packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the motor assembly.
2 screws 3.9 x 7.5 mm for securing the chimney.
2 screws M4 with locking nuts and plastic washers for securing the glass canopy.
1 allen wrench
for adjusting the unit height and fixing the operating unit.
1 screw cover
1 lever for disassembling the chimney
29
