Installation

Recirculation connection

^ DA 362-75:

 

In recirculation mode, one cut out

 

must be made, where the ducting

 

ends, for the installation of the

 

recirculation vents, b.

 

If installing the hood over an island or

 

in a cabinet at ceiling height, a

 

suitable cut-out has to be made in

 

the front panel, d.

^ DA 362-110:

In recirculation mode, 2 cut outs must be made, where the ducting ends, for the installation of the recirculation vents, b.

If installing the hood over an island or in a cabinet at ceiling height, a suitable cut-out has to be made in the front panel, d.

^ The exhaust connection, a, and the recirculation vent, b, are joined together with a pipe or flexible duct, c, cut to size.

When installing the recirculation vents make sure that the slats point towards the center of the room and not to a wall or the ceiling.

^ Install the active charcoal filters (see "Cleaning and Care").

32

Page 32
Image 32
Miele DA 362-75 installation instructions Recirculation connection