Installation
3 protective shields
to prevent scratches to the chimney during installation.
1 vent collar
for use with 6" (150 mm) exhaust ducting.
1 reducing collar
for use with 5" (125 mm) exhaust ducting.
Upper wall bracket
for securing the telescopic extension piece
Middle wall bracket
for securing the telescopic extension piece
Lower wall bracket
for securing the ventilation system
Installation kit for recirculation mode
contains diverter, hose and hose clips (optional accessory).
6 Screws 5 x 40 mm
(S8 wall anchors included in the packaging are not for use in USA / CDN)
The screws and wall anchors are suitable for solid brick walls.
For other wall constructions, use appropriate materials.
Ensure that the wall can support the weight.
2 M 6 locking nuts
for securing the motor assembly.
2 Screws 3.9 x 7.5 mm for securing the chimney.
1 Lever
for dismantling the chimney.
Installation instructions
29