Electrical data
All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Ensure that power to the appliance is off while installation or repair work is performed.
Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filters), match the household electrical supply before installing the hood.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department.
U
V
WARNING:
THIS APPLIANCE MUST BE GROUNDED
Important
The hood comes equipped with a 5 ft (1.5 m) power cord with a NEMA
120 VAC, 60 Hz, 15 A power outlet.
DA 402
Maximum load . . . . . . . . . . . . . . 410 W
Overhead lighting . . . . . . . . . . 3 x 20 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V
Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit rating . . . . . . . . . . . . . . . . . . 15 A
27
