Miele DWHD651JFP manual Sapphire 6-PROGRAM, Custom Door Panels DWHD650JPR, DWHD650JFP DWHD650JFM

INSTALLATION OPTIONS

CUSTOM DOOR PANELS (DWHD650JPR)

Fully integrated models allow you to have a custom door panel made to match your cabinetry. The custom door can be a two-piece confi guration to look like a drawer at the top and a cabinet door at the bottom or like a single full-length door. A template is included with the fully integrated models to explain the mounting procedure.

NOTE: The door springs that are included with the fully integrated units will provide proper function for custom door panels weighing between 9 and 18 pounds. No tension adjustment screws are necessary.

WATER AND ELECTRICAL LOCATIONS

For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. Plumbing and electrical service must enter shaded area.

Make required openings to allow for passage of the water, drain and electrical line. In order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown.

NOTE: If the incoming electric supply, water supply and drain connections are all in the same cabinet, the one

4 1/2" x 2 1/2" hole will be large enough for all three to pass through.

The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the dishwasher (do not mount the junction box or receptacle behind the dishwasher). You will need a 4 1/4" x 2" (108 x 51 mm) opening through the cabinet in order to pass the junction box through.

The electrical supply can be connected in one of two ways:

–Use the included 3-wire plug and junction box to connect to a dedicated household receptacle.

–Permanently connect to household or fi eld wiring

WATER AND ELECTRICAL LOCATION DIMENSIONS

SAPPHIRE SERIES

REQUIRED OPENINGS:

4 1/4" x 2" (108 x 52 mm) – To pass the included electrical supply junction box through to an adjacent cabinet

4" x 2" (100 x 50 mm) – To pass the included water supply line toward the water supply

1 1/4" (32 mm) diameter – To pass the dishwasher drain hose toward the drain connection

Electrical and Water Connection

DISHWASHERS

SAPPHIRE® 6-PROGRAM

DWHD650JFP / DWHD650JFM / DWHD650JPR

DISHWASHER & CUTOUT DIMENSIONS

DWHD650JFP

DWHD650JFM

			*24-241/4"
	24"	(610-616 mm)					227/16"
							(570 mm)
	(610 mm)							341/16"-367/16"
				239/16"				(865-925 mm)
						(598 mm)	305/16"
	min. 341/16"							(770 mm)
								* 235/8" (600 mm) without
(min. 865 mm)								decor strips
							33/4"-61/2"
								(95-165 mm)
31/2"			21/16"
			(53 mm)
	(89 mm)		45/8"
					(117 mm)			Measurements in inches and mm

DWHD650JPR

****24-241/4"

**5/8"-7/8"

(16-22 mm)

(610-616 mm)

215/8"

24"

(550 mm)

(610 mm)

341/16"-367/16"

***231/8"-233/8"

(865-925 mm)

(588-594 mm)

*273/4"-301/2"

min. 341/16"

(705-775 mm)

* measured from the bottom

edge of the countertop panel

(min. 865 mm)

** panel weight 9-18 lb (4-8 kg)

35/8"-83/4"

(92-222 mm)

*** 24" (610 mm) wide panel

239/16"

may be used depending

on cabinet design

21/16"

31/2"

(598 mm)

****235/8" (600 mm) without

(53 mm)

(89 mm)

315/16"

decor strips

(100 mm) Measurements in inches and mm

***231/8"-233/8"					*	measured from the bottom edge of the
						countertop panel
(588-594 mm)				*273/4"-301/2"
					**	thickness recommended 3/4" (20 mm),
				(705-775 mm)		panel weight 9-18 lb (4-8 kg)
					*** 24" (610 mm) wide panel may be used
						depending on cabinet design
						Measurements in inches and mm
**5/8"-7/8"
(16-22 mm)
	24"	(61cm)		Dedicated
90°				Receptacle or
				Field Wiring
	2"
		)
	(5
				Dishwasher
	cm
			34¼"(86.7cm)	Electrical Supply
				Junction Box
4" (10cm)						Electric cord with
						junction box and
						three wire plug
						are included
						with dishwasher
				)	Water
			cm
		.6			Shut Off
	-61					Dishwasher
					Valve
	(61					Water Inlet
	¼"
						Hose
-24
24"

DISHWASHERS

1.800.735.4328 THERMADOR.COM 299