Miele EGW2062 installation instructions Important Installation Safety Instructions

IMPORTANT INSTALLATION SAFETY INSTRUCTIONS

￿Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician.

￿The electrical outlet should be easily accessible after installing the unit.

￿Be sure that after installation the power cord does not come into contact with any hot surfaces.

￿Only install the plate warmer in combination with built-in appliances recommended by the manufacturer. When installed with other appliances, the warranty is void since the manufacturer cannot guarantee the safe use of the plate warmer.

￿To install the plate warmer in combination with another appliance, a built-in shelf must exist in the cabinet to support the weight of both appliances.

￿When installed in combination with another appliance, the plate warmer must always be installed beneath the other appliance. The combination appliance can be set without a base directly onto the plate warmer. A shelf between the appliances is not necessary.

￿To install the combination appliance please see the manual supplied with that machine.

￿This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements.

Note to the installer:

Please leave these instructions with the consumer of the appliance for the local building inspectors use.

SAVE THESE

INSTRUCTIONS

16