Use
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time is shown in the time display.
The running time for the same program may vary depending on the intake water temperature, load size and soiling.
When a program is selected for the first time, a time is shown which equals an average program running time with cold water.
Each time a program is run, the electronic adjusts the program running time according to the intake water temperature and the load size.
If no key is pressed the time display turns off automatically after a few minutes. Press any key (except ) to show the time display again.
Program sequence display
Once a program has been started the current stage of the program is shown in the program sequence display by the indicator lights.
At the end of a program
The program is complete when a "0" appears in the time display and the "End" indicator lights up.
Dishes tends to chip if removed still hot from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open the door slightly. The dishes will cool much faster.
Unload the dishwasher.
Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.
Turn the dishwasher off "".
The dishwasher continues to use electricity until turned off with the "" button.
Preparing your appliance for an extended vacaion
If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak.
To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc.
29
