Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Issue | Possible fault | Solution |
None of the indicators | The machine is not | Insert the plug. |
light or flash. | plugged in. |
|
| The fuse has tripped. | Reset the circuit breaker. |
|
| Make sure it is a 15 A |
|
| breaker. |
The dishwasher does | The program selector | – Turn the program selector |
not start after the | does not point to a | to the desired program. |
Start/Stop button was | program. | – Press the "Start/Stop" |
pressed. |
| button. |
The dishwasher stops | The fuse has tripped. | Reset the circuit breaker. |
during a program. |
| Make sure it is a 15 A |
|
| breaker. |
The "Rinse", "Drying" | There may be a technical | – Turn the dishwasher off s. |
and "End" indicators | fault. | After a few seconds: |
flash at the same |
| – Turn the dishwasher on. |
time. |
| |
| – Turn the program selector | |
|
| |
|
| to the desired program. |
|
| – Press the "Start/Stop" |
|
| button. |
|
| If the problem persists, call |
|
| Technical Service. |
The drain pump runs | The waterproof system | – Turn off the water supply. |
when the door is | has activated. | – Call Miele Technical |
open. |
| Service. |
29
