Miele G 2472, G 1472 manual Programming the water softener, Before using for the first time

Before using for the first time

Programming the water softener

To exit the programming mode at any time, turn the dishwasher off with the "O" button.

￿Turn the dishwasher off with "￿".

￿Press and hold the "Program" and "￿" buttons simultaneously. Hold the program button until the lower right program indicator lights.

If it does not come on, start over.

￿Press the "Options" button twice.

The "Tab" indicator flashes twice in intervals.

"p 1 5" flashes in the time display.

A water hardness setting of 15 °d is set (factory default).

The set value is indicated in the time indicator following "p" (see table).

°d	gr/gal	Setting in display
1	1	1
2	2	2
3	3	3
4	4	4
5	5	5
6	6	6
7	7	7
8	8	8
9	9	9
10	10	10
11	11	11
12	12	12
13	13	13
14	14	14
15	15	15
16	16	16
17	17	17
18	18	18
19	19	19
20	20	20
21	21	21
22	22	22
23	23	23
24	25	24
25	26	25
26	27	26
27	28	27
28	29	28
29	30	29
30	31	30
31	32	31
32	33	32
33	34	33
34	35	34
35	36	35
36	37	36
37-45	38-46	45
46-60	47-62	60
61-70	63-73	70

￿Press the "Program" button to select the value which corresponds with the water hardness in your area.

With each press of the key the value will raise. Once the highest value is reached the values will start again from the beginning.

￿Turn the dishwasher off with "￿".

12