Before using for the first time
Adjusting the dosage
In order to obtain an optimal cleaning result you can adjust the dosing quantity of the rinse aid.
The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6.
–Use a higher setting if spots appear on dry glassware.
–Use a lower setting if streaking appears on dishes or glasses.
Turn the dishwasher off "".
Press the "Start / Stop" button and at the same time turn the dishwasher on . Hold the "Start / Stop" button until the "Start / Stop" indicator comes on.
If it does not come on, start over.
Press the program button three times.
The lowest program indicator flashes three times in intervals.
The "Cleaning" indicator flashes three times in intervals.
A rinse aid amount of 3 ml is set by default.
The amount set can be recognized by the flashing rhythm of the "Cleaning" indicator (see table).
Rinse aid | Flashing |
amount in ml | rhythm |
|
|
0 | – |
|
|
1 | Once |
|
|
2 | Twice |
3 | Three times |
|
|
4 | Four times |
|
|
5 | Five times |
|
|
6 | Six times |
Select the desired setting with the "Start / Stop" button. Every touch of the button increases the level.
The programmed dosage is saved.
Turn the dishwasher off "".
16
