Buzzer

A signal sounds at the end of a
program and when a fault occurs.
The buzzer at the end of a program
sounds four times in intervals with a
brief break in between.
The buzzer for a fault sounds four times
without pausing.
The buzzer is activated by default.
It can be turned off, so it does not
sound at the end of a program. The
buzzer for a fault cannot be turned off.
^Open the door.
^Turn the dishwasher off with the V
button.
^Press and hold the Program button
and turn the dishwasher on
simultaneously using the Kbutton.
Keep the program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^Press the Program button four times
briefly.
The "Intake/Drain indicator flashes 4
times at short intervals.
The sequence of flashing by the upper
right program indicator shows whether
the program end buzzer is turned on or
off:
–upper right program indicator
flashing: buzzer is turned on
–upper right program indicator is off:
buzzer is turned off
^To change the setting press the
"Program" button (for at least one
second) until the "Intake/Drain"
indicator lights up.
^Now press the Program button
briefly.
The setting is saved immediately.
^Turn the dishwasher off with the V
button.
Additional options
33