Settings menu
Drying Plus
The Drying Plus function automatically opens the door slightly at the end of a program with a drying phase (except "Extra quiet"), in order to improve the drying process. (see the "Program guide").
This function can also be deactivated.
Select the desired setting and confirm with the center button.
If you have deactivated the auto- matic door opening function but would still like to open the door at the end of the program, then make sure that you open the door fully. Otherwise steam from the dishwasher could damage the edge of the counter top because the fan is no longer running.
Optimize standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the indicator light flashes slowly.
If the dishwasher is not turned off after the program ends, it will turn completely off after a few minutes in standby mode.
This function can also be turned off. The display and the indicators stay on and the dishwasher will turn off after approx. 6 hours.
Select the desired setting and press the center button.
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.
The refill messages can be turned off when you use a tab detergent. Fault messages cannot be turned off.
45
