en
Selecting the suction power setting
You can adjust the suction power to suit your preference.
Rotary selector (see fig. 15)
Turn the suction power selector to the desired setting.
PremiumLine Models (see fig. 16)
"Automatic" button
+/- controls, to set the desired suction power setting
"Thermo" indicator
Blockage protection indicator
Service indicator (reset button)
"Carpet" indicator, the Powerbrush was turned on using the Carpet/Floor button on the hand piece.
+/- Controls (see fig. 17)
The symbols on the control panel indicate what each setting is recommended for:
curtains, lightweight fabrics
upholstery, cushions
thick pile carpets, rugs and runners
energy saving, daily vacuuming with low noise level
low pile carpets
hard flooring and intensive cleaning of carpets.
To select a higher power setting, press the + button.
To select a lower power setting, press the - button.
The selected power level is displayed with a yellow light.
"Automatic" setting (see fig. 18)
(models with +/- controls)
If the "Automatic" setting is selected, the vacuum cleaner will automatically adjust the suction power level to suit the surface being cleaned.
Press the "Automatic" button. The button lights yellow.
To deactivate the setting, press the "Automatic" button again.
Do not use the this setting to vacuum draperies or other lightweight fabrics. Excessive suction may cause damage.
Note (see fig. 19):
To adjust to changing floor heights, e.g. carpet edges, thresholds, etc., briefly step on the release button to raise the front of the vacuum cleaner.
11
