Settings
Using the settings
When a sensor button has been selected with a finger touch, it will appear yellow.
A
^Touch the access button "p" so it turns yellow.
On the control panel you will now see the sensor buttons for the three appliance zones.
^To change settings (e.g., to set the temperature, etc.), touch the sensor button for the appliance zone you wish to set.
The selected sensor button appears yellow and depending on the zone selected, additional sensor buttons will appear on the control panel.
Depending on the zone selected, you can now:
–adjust the temperature,
–select the SuperCool function or
–select settings for the SmartFresh drawers by food type.
For additional information, see the corresponding sections in the manual.
^To
^To leave the settings menu, touch the access button "p" so it turns white. The last settings entered are stored. If the access button is not pressed the display will go out after approx. 30 secs.
The sensor buttons for the three appliance zones now disappear from the control panel.
10
