Before use
Before using for the first time
The stainless steel surface of the appliance is protected with a plastic film, which protects it during shipping.
Do not remove this protective film until the appliance has been completely installed.
After removing the protective film clean the exterior surface with the supplied stainless steel agent. This will aid in preventing resoiling.
Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth.
If the appliance was transported or laid horizontally for any reason, allow it to stand vertical for at least 8 hours before turning it on. Failure to do so will affect the functioning of the appliance.
Turning the appliance On/Off
Open the appliance door.
Turn the appliance On/Off with the main switch.
The main switch is located on the
All zones are switched on or off together.
Once on, the appliance begins cooling. When the door is open, the interior lights come on.
The access button will light in the control panel.
The preset temperatures (factory settings) are reached after a few hours. Do not put any food in the appliance until the preset temperatures are reached.
Switching the appliance off with the main switch does not safely isolate it from the power supply.
9
