Electrical connection
Caution:
All electrical work should be performed by a qualified electrician in accordance with local and national codes.
Disconnect the appliance from the main power supply before servicing. To reduce the risk of electric shock, make sure that the appliance is properly grounded after installation.
Power supply
Please check the data plate for 240 VAC, 60 Hz,
208 VAC, 60 Hz
and make sure your electrical supply matches the data plate.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
The appliance is provided with 3 leads; L1 (black), L2 (red) and GND (green). They must be connected to a dedicated line through the use of an approved junction box.
For further information, see the wiring diagram provided with the appliance.
Note to the installer:
Please leave these instructions with the consumer.
9