Manual abstract:

The minimum distance of combustible surfaces located above and to the sides of the cooktop, e, is 18" (457 mm). If the cabinet manufacturer recommends a

greater distance, follow that manufacturers recommendation. When installing the cooktop under a venting hood, always observe the minimum distance

recommended by the hood manufacturer. Keep this instruction book in a safe place for reference and pass it on to any future user. Appliance dimensions KM 342 a Built-in depth KM 342 (stainless steel) 2 5/16" (58 mm) b Built-in depth KM 342 (black or white) 3 3/8" (86 mm) ^ Rember to maintain the minimum safety distances to combustible surfaces: - 2 3/4" (70 mm) between the cut-out and the back wall and - 12" (305 mm) between the cut-out and a side wall or tall unit to the right or left of the cut-out. (See "Important Safety instructions"). 6 Appliance dimensions KM 344 a Built-in depth KM 344 (stainless steel) 2 5/16" (58 mm) b Built-in depth KM 344 (black or white) 3 3/8" (86 mm) ^ Rember to maintain the minimum safety distances to combustible surfaces: - 2 3/4" (70 mm) between the cut-out and the back wall and - 12" (305 mm) between the cut-out and a side wall or tall unit to the right or left of the cut-out. (See "Important Safety instructions"). 7 Installation Setting the cooktop into place Securing the cooktop ^ Secure the cooktop with the included fixing bracket. Countertop 13/16" (20 mm) d c ^ After removing the protective backing, d, stick the supplied seal, c, under the edge of the cooktop.

^Screw the gas regulator onto the nipple underneath the cooktop. (See "Gas Connection - Gas pressure regulator".) ^ Feed the power cord through the cut- out to the power outlet. ^ Set the cooktop in the cut-out and center it. Install the appliance so that the power cord and gas piping does not come in contact with

any portion of the cooktop which may become hot during use.

Countertop 1 9/16" (40 mm) 8 Installation Important The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal. If the cooktop is sealed into position, the countertop or appliance may be damaged if the cooktop needs to be removed for maintenance or service. 9 Electrical connection This appliance must be electrically grounded according to local or national codes. All electrical work should be performed by a qualified electrician in accordance with local codes and the: National Electrical Code ANSI / NFPA No.

70 for the USA To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy, of an effective grounding system. Note to the installer: Please leave these instructions with the consumer or the appliance. This appliance is equipped with a three-prong grounding plug to prevent shock hazards. It should be plugged directly into a properly grounded outlet. Do not cut or remove the grounding prong from the plug. If the plug does not fit the outlet, have a proper outlet installed by a licensed electrician. or - Canadian Electrical Code Part I for Canada (CSA Standard C 22.

1). WARNING: Disconnect the appliance from the main power supply before installation or service. To reduce the risk of electric shock, make sure that the

appliance is properly grounded after installation. Power supply: The automatic ignition requires that the cooktop be connected to a 120 VAC, 60 Hz power supply. The supply line should be protected by a 15A fuse. Actual power consumption (during ignition only) is 25W. This appliance is equipped with a 4 ft. (1.2 m) long power cord that is ready for connection to the appropriate outlet. Please place the power outlet so that it is accessible after the appliance has been installed in the countertop.

.

Your user manual

MIELE KM 344G MASTERCHEF GAS COOKTOP

Powered by TCPDF (www.tcpdf.org)

Page 1 Page 2
Page 2
Image 2
Miele KM 344G user manual Manual abstract, Any portion of the cooktop which may become hot during use
Page 1 Page 2

KM 344G specifications

The Miele KM 344G is a contemporary gas cooktop that epitomizes quality and precision in cooking technology. Crafted with a keen eye for detail, it reflects the renowned Miele commitment to excellence, making it a popular choice among culinary enthusiasts and professional chefs alike.

One of the standout features of the KM 344G is its robust and stylish design. The cooktop is constructed from high-quality stainless steel, ensuring durability and a sleek appearance that can seamlessly integrate into any kitchen decor. Its four gas burners, including a powerful high-output burner, provide versatility for various cooking techniques and needs. With an array of flame control options, users can achieve precise temperature adjustments from rapid boiling to gentle simmering.

Safety is paramount in the design of the KM 344G. It comes equipped with Miele's innovative flame failure safety device. This technology automatically cuts off the gas supply if the flame goes out, providing peace of mind during cooking. The cooktop also features continuous cast iron grates, which facilitate easy movement of pots and pans across the surface, enhancing convenience and efficiency in multitasking.

Another notable characteristic is the intuitive controls. The KM 344G is designed with user-friendly knobs that allow for straightforward operation. Its front-mounted control knobs are not only accessible but also ergonomically designed for comfort and ease of use.

Moreover, the gas cooktop is compatible with various accessories, making it suitable for a wide range of cooking styles. Whether you are searing, frying, or simmering, it delivers consistent and reliable performance. The cooktop's efficient heat distribution ensures even cooking times, thereby enhancing the flavors of the prepared dishes.

In terms of maintenance, the KM 344G is designed for effortless cleaning. The removable grates and controls make it easy to wipe down the surface, keeping the cooktop looking pristine. Overall, Miele KM 344G combines elegance, functionality, and cutting-edge features, making it a premier choice for anyone looking to elevate their culinary experience. With its blend of safety, design, and performance, the KM 344G stands as a testament to Miele’s engineering excellence and dedication to quality in the kitchen.
Top Page Image Contents