![](/images/new-backgrounds/1070119/7011979x1.webp)
Programming special functions
Special function 1
Setting the rinse temperature
If you alter the rinse temperature, make a note of the new temperature in the appropriate column of the "Program Guide".
The rinse temperature factory setting is listed in the "Program Guide".
Use Special function 1 to change the rinse temperature from 85 °C to 65 °C.
At a temperature of 85 °C, the drying fan will turn on when the temperature reaches 65 °C to dissipate the steam.
The drying fan will continue to run for 45 minutes after the program has finished.
The rinse temperature cannot be altered in the programs "Glasses"
(G 8050) / "China & Crystal" (PG 8050i) and "Beer Glasses".
It is not possible to change settings while a program is running. You will have to cancel the program. The "Start/Stop" indicator must be flashing.
Accessing the rinse temperature programming level
Turn the dishwasher off with the "On/Off" button.
Press and hold the "Extra drying" and "Start/Stop" buttons, at the same time, turn the dishwasher on with the "On/Off" button.
The "Wash" indicator will come on and the "Recharge" indicator will flash.
The set water hardness will then appear in the display.
Press the "Extra drying" button twice. The programming level is accessed.
The "Spray arm" indicator will come on, the "Mini" (G 8050) / the "Express"
(PG 8050i) indicator will come on or will flash and the "Recharge" indicator will flash.
Special function 1 "Setting the rinse temperature" is selected and indicated with
40