Maintenance and care
When to change the thread catcher pads of the standard floor brush
(depending on model)
The thread catcher pads on the bottom of the standard floor brush (depending on model) should be checked occasionally. Replace the pads if they appear worn.
Replacing the thread catchers
Use a knife or similar object to
remove the thread catchers from the slots.
Insert the new thread catchers.
Cleaning the floor brush roller
(not possible with the
AirTeQ SBD
Unlock the roller pin with a coin.
Push the pin out and remove it.
Remove the roller.
Remove any threads and hair from the roller.
Replace roller in the reverse order.
25 |